Scilabubs Nomex® glove range are made in the UK to meet the requirements of the European Standard EN 407.
The following information applies to these standards.

Gloves can be used under normal climatic conditions.

Gloves can be used upto 5 years after the date of manufacture if stored correctly. Store in original packaging. Store away from direct sunlight to maintain optimum properties.

This glove series satisfies the basic requirements of the PPE directive in being innocuous/free from nuisance factors, ergonomic and breathable. Conditions of use are not simulated by the test results and as such service life cannot be specified. Results should be used for guidance in initial selection.

Gloves are made to EN 420 sizes.

Packaging/Labels: The gloves shall be wrapped in pairs by polymeric packaging. Each packet shall be labelled with the appropriate marking with regards to amount, type, size, manufacturer, performance level and CE mark. Each pair of gloves shall contain labels containing similar details. Each consignment will include an information sheet containing user instructions.
Warning:
Care instructions: In the event of mild contamination, gloves may be rinsed in water and allowed to drip dry in ambient temperatures.
Performance: EN 388
Abrasion Resistance
Blade Cut Resistance
Tear Resistance
Puncture Resistance

Level
1
X
4
X

Performance: EN 407
Burning Behaviour
Contact Heat
Convective Heat
Radient Heat
Small drops molten metal
Large drops molten metal
Level
4
1
3
0
1
X

Heat Test Pictogram EN 407
41301X